GRASS VALLEY GV MATRIX, Руководство пользователя

Страница: 36 / 115

20
Configuring Your GV Matrix
Local control panel
The IP addresses of control ports ETH1 and ETH2 are displayed alternately in the top left
corner of the home screen.
Access buttons with integrated status monitoring are provided for:
• Each of the 16 modular card slots [ SLOT NUMBER, INSTALLED CARD TYPE ].
• The IFM-2T fabric module [ IFM-2T ROUTER ].
• The CPU-ETH3 controller [ CTRL ].
• The controller’s integrated reference module [ REF ].
In addition, status monitoring is shown for each of the two power supplies PS1 and PS2,
and for the frame’s cooling fans.
The status of each of these elements is shown by the color of the button outline.
Color Meaning
Green Status OK
Yellow Warning
Red Error
Flashing Red Critical error
Gray No card in the slot (modular card slots only)
Status and alarm reporting is configured independently for each module, through it’s
iControl interface. See
Alarm Configuration on page 84 for information about status and
alarm reporting and configuration.
Touching an access button brings up the local control menu for the selected module.
Touching the CTRL segment displays the local menu for the CPU-ETH3 controller itself.
The full CPU-ETH3 controller menu is shown beginning on page 50 .
The functionality of the four virtual pushbuttons is as follows:
[+] [–] Move up and down the menu when a parameter name is shown