(4) Move the cursor to the "Level" next to the "Mode" and then press the
[ENTER] key.
(5) The input box shown in the following screen is displayed. Set to "20".
Use the and keys to move to the cursor to the second digit from the
right, and the and keys to change the value. Press the [ENTER]
key.
(7) The screen returns to the TRIG menu screen. Press the [QUIT] key to
return to the GL840 to the Free Running status.
(8) Press the [START/STOP] key to start data capture.
If the trigger condition has not been satisfied, the GL840 goes into the
"Armed" status as shown on the following screen.
(6) When the screen changes to the following screen, move the cursor to the
button and then press the [ENTER] key.
When the trigger condition is satisfied, the recording is started after the
display is changed to the “Data capture SD card 1” .
Numerical value input box
Lower and upper limit for setting.
Waveform area for confirmation
• Use the and keys to change the
values.
• Use the and keys to move the
digit.
• Use the [ENTER] key to confirm the
value.
• Use the [QUIT] key to cancel the
setting.
18
Points to Remember
The trigger of this trigger function can be set easily from the "Easy trigger
setting" menu in the navigation displayed by pressing the [NAVI] key.
