GRAPHTEC CS1000EV, Руководство пользователя

Страница: 5 / 75

– iv –
Safety Precautions (Continued)
CAUTION
Be careful not to damage the power cord or SCSI
interface cable and never use a damaged cord or
cable.
• Do not use unnecessary force to bend, pull, twist,
or bind the cord and cable, place a heavy object
on them, nor remodel them. Such actions could
result in scratches or damage to the cord or cable.
• Use of a damaged power cord or interface cable
may result in electrical shock or a fire hazard.
• Replace the damaged cord or cable with a new one.
When disconnecting the power cord or the SCSI
interface cable, do not pull on the cord/cable.
• Such action will damage the cord/cable, resulting
in a fire hazard or electrical shock. Be sure to hold
the power cord’s plug or the interface cable’s con-
nector.
Before disconnecting the power cord or SCSI
interface cable, be sure to turn off the scanner.
• Failure to do so may damage the scanner’s per-
formance and cause it to malfunction or break down.
• Failure to do so may result in electrical shock.
Before cleaning the scanner, be sure to unplug
its power cord from the electrical socket.
• Failure to do so may result in electrical shock.
Do not install, use, or store the scanner in a
location exposed to direct sunlight and/or the
direct draft of an air conditioner or heater.
• Such location may impair the scanner’s performance
due to deformation or other damage and cause the
scanner to malfunction or break down.
Never damage or
use when damaged
Turn off the Power
switch
Pulling prohibited
Unplug the power
cord from the socket
Prohibited