Graphite 59G370, Инструкция по эксплуатации

Страница: 17 / 25

17
OPERATION AND MAINTENANCE
Unplug the power cord from the mains socket before commencing any activities related to
installation, adjustment, repair or maintenance.
●
Soft brush or compressed air are best for cleaning the wall chaser.
Do not clean the wall chaser with water or chemical cleaning agents.
●
Store the wall chaser in dry place, beyond reach of children.
●
Keep ventilation holes of the motor unobstructed.
●
In case of excessive commutator sparking have the technical condition of carbon brushes of the motor
●
checked by a qualified person.
Regularly check that all bolts and fixing screws are tightened. During operation they may get loosened
●
after some time.
Entrust replacement of power cord and other repairs only to authorized service workshop.
●
REPLACEMENT OF CARBON BRUSHES
Replace immediately worn out (shorter than 5 mm), burnt or cracked motor carbon brushes. Always
replace both carbon brushes at a time.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be
used.
All faults should be repaired by service workshop authorized by the manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
Wall Chaser
Parameter Value
Supply voltage 230 V AC
Current frequency 50 Hz
Rated power 1320 W
Idle rotational speed 9000 rpm
Protection class II
Cutting blade diameter 125 mm
Inner diameter of cutting blade 22.2 mm
Spindle thread diameter M14
Chase width range 8 - 26mm
Chase depth range 8 - 30 mm
Weight 4,2 kg
Year of production 2014
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp
A
= 97,16 dB(A) K = 3 dB(A)
Sound power: Lw
A
= 108,16 dB(A) K = 3 dB(A)
Vibration acceleration: a
h
= 7,451 m/s 2 K = 1,5 m /s 2
ENVIRONMENT PROTECTION
Do not dispose of electrically powered products with household wastes, they should be utilized
in proper plants. Obtain information on waste utilization from your seller or local authorities.
Used up electric and electronic equipment contains substances active in natural environment.
Unrecycled equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.