WALL MOUNT
MULTI-MATERIAL CUTTER
G1089 1/22
Instruction Manual
Model F700-1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com
8
Attach Counter-Balance Weight Bag
3. Holding the Bag in your right hand and keeping tension on the cable
with your left hand, step up on ladder and loop cable over Pulley with
left hand (Fig. 24).
4. Slowly lower Bag until cable is taut (Fig. 25).
Install Production Stop
1. Slide Production Stop lockplate into right or left Cutting Bed and slide to
desired location (Fig. 26).
2. Tighten stop knob to secure.
Install Parts Tray
1. Remove adhesive backing from bottom of Parts Tray.
2. Stick onto right side bracket (Fig. 27).
Use Trash Can
It is recommended that you place a small trash can under bottom of
cutting bar to catch debris (Fig. 28).
Fig. 24
Fig. 25
Fig. 28
Fig. 27
Fig. 26
