background image

Thank you for your purchase of the 

intimus

®

line of Business Card Slitters or Scoring/Perforating machines.

With proper maintenance your unit will provide you with years of service.  Upon receiving the machine verify that
there are no signs of shipping damage on the exterior.  If you feel the product may have been damaged in tran-
sit, contact the appropriate freight carrier immediately, then contact technical support at Martin Yale Industries,
Inc. at 260-563-0641.  

Upon opening the machine, verify that you have the following components.

Operating Instructions

SP100, BCS400 series

BCS400 Series

SP100

1.0 Introduction

2.0 Inventory of Contents

SP100

BCS400 Series

SP100 Unit

BCS400 Series Unit

Catch Tray  W-ODT0021

Receiver Tray  W-ODT0024

Paper Support  W-ODT1124

Receiver Base Form  W-ODT0023

3/32" T- Handle Allen  M-S012012

Paper Support  W-ODT1124

Operating Instructions

T- Handle 3/32" Allen  M-S012012

8.5" Top Plate  W-ODT0100

10 - Up Catch Tray  W-ODT0021

11.0" Top Plate  W-ODT0200

12 - Up Catch Tray  W-ODT0020
Operating Instructions
8.5" Top Plate  W-ODT0100
11.0" Top Plate  W-ODT0200

> Accessory shafts can be easily disassembled for addition of optional  

components.

> Units will handle 24# bond to 100# cover stock.
> Min. Sheet Size  4 1/8" X 3 ½"
> Max. Sheet Size  8 ½" X 11"
> Speed:  BCS412: 300 finished cards per minute.

BCS410:  375 finished cards per minute.
SP100:  1400 8 ½" X 11" sheets per hour.

Model:
Serial No:
Manuf. Date:

3.0 Specifications

SHIPPING WEIGHTS

-MODEL SP100

23 lb#

-MODELS 410&412

44 lb#

Содержание Intimus SP100









Отзывы: