WALL MOUNT
MULTI-MATERIAL CUTTER
G1089 1/22
Instruction Manual
Model F700-1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com
16
To Fracture or Separate the Plastic
1. Retract cutting handle.
2. Raise cutting head above top of plastic.
3. Align crack roller at top of material by pressing the crack bar (Fig. 50).
4. Keeping even downward pressure, push on crack bar and pull down
through length of plastic. You should hear cracking sound. If you do not
hear cracking sound, repeat.
*Note - Sometimes you may not hear a cracking sound but material will
be separated.
5. Release clamp.
6. Remove plastic and bend plastic at cut line to separate.
*Note - If material is still not separated, rescore plastic by aligning blade
tip into scoring channel and then clamping material. Rescore several
times to ensure break.
7. Clean cutting bed using cleaning brush.
Fig. 50
