WALL MOUNT
MULTI-MATERIAL CUTTER
G1089 1/22
Instruction Manual
Model F700-1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com
19
Troubleshooting
Problem:
When cutting glass, the glass cutter jumps or skips.
Cause 1:
Dirty Glass.
Solution:
Clean glass.
Cause 2:
Worn glass wheel.
Solution: Rotate to new wheel.
Cause 3:
Too little pressure.
Solution:
Adjust by applying slight pressure with hand.
Solution:
Oil the active wheel.
Cause 4:
Shards of glass impairing proper rotation of glass wheel.
Solution:
Oil the active wheel.
Problem:
When cutting glass, chipping or flaking occurs.
Cause:
Too much pressure
Solution:
You may be applying too much pressure on the handle. Pull back on the handle during cut.
Too much pressure will shorten wheel life. Never score twice.
Solution:
Oil the active wheel
Glass Cutting Problems
Problem:
When cutting plastic, it skips and/or chatters.
Cause 1:
Scoring too fast
Solution:
Slow down the stroke speed
Cause 2:
Scoring tool broken
Solution:
Rotate cutter if you have not done so previously
Cause 3:
Too much pressure
Solution:
Reduce pressure slightly on handle
Cause 4:
Not using media clamp
Solution:
Use media clamp
Plastic Cutting Problems
