WALL MOUNT
MULTI-MATERIAL CUTTER
G1089 1/22
Instruction Manual
Model F700-1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com
6
Mounting Cutting Beds
1. Attach Left Cutting Bed (long 48”) (Fig. 9) onto mount bar studs and
secure with two (2) mount nuts (Fig. 10).
2. Align Gusset with left cutting bed and cutting bar assembly (Fig. 11).
3. Attach Gusset with seven (7) flat head screws.
*Note* Attach screws in the order shown (Fig. 12).
4. Attach Right Cutting Bed (shorter 24”) onto mount bar studs and secure
with two (2) mount nuts (Fig. 13).
5. Attach Support Bar by aligning pins in support bar with holes in Right
Cutting Bed and Cutting Bar (Fig. 14 & 15).
6. Secure Support Bar with four (4) screws (Figs. 16A & 16B).
7. Attach Side Brackets onto cutting bed studs with four (4) mount nuts
(Fig. 17).
8. Align Side Brackets to wall, and mark holes with a pencil.
Fig. 9
Fig. 10
Fig. 11
Fig. 12
1
2
5
4
7
6
3
Fig. 13
Fig. 14
Fig. 15
Fig. 16A
Fig. 16B
Fig. 17
