Operating Instructions for Tractor A-Frames
Type: GRANIT Index group 778
7
ATTENTION: The use of unsuitable or defective tools can lead to accidents and
injuries. VERLETZUNGSGEFAHR!
ATTENTION: The mounting may only be carried out by technically instructed
persons. UNFALLGEFAHR!
1.
Remove all parts of the packaging and place them on a clean and stable surface.
ATTENTION: The use of defective parts can lead to accidents.
2.
Mount the attachment of the operating lever as shown in Figure 2.
3.
Secure the attachment with the screws and nut supplied (2x SW10).
4.
Check the work that has been carried out and take immediate corrective action if
necessary.
5.1.
Mounting and dismounting on the tractor
ATTENTION: Before mounting and dismounting, secure the tractor against
unauthorised reconnection. UNFALLGEFAHR!
5.1.1.
Mounting on the tractor
1.
Checking the conformity of the connection points. If there are any doubts, consult a
specialist.
ATTENTION: Combining categories that do not match is likely to increase the risk
of accidents.
2.
Make the mechanical connection between the tractor and the tractor A-frame according to
the tractor operating instructions.
ATTENTION: Improperly fitted connections can jump off and cause increased risk of
injury and environmental damage.
3.
Check that the connections made are securely fitted and have sufficient clearance to vehicle
parts (Fig. 2).
IMPORTANT: Insufficient clearance can cause damage to the tractor and the tractor
A-frame.
5.1.2.
Dismantling from the tractor
1.
Loosen the mechanical connection of the top link according to the tractor operating
instructions.
ATTENTION: Make sure the top link is secured, because if it knocks around, it can
lead to injuries. After the top attachment point is released, the tractor A-frame can
fold down and cause injuries.
2.
Fold down the tractor A-frame on a suitable surface.
3.
Unlock the lower link connections according to the tractor operating instructions.
ATTENTION: Once it has been folded down and unlocked, the tractor A-frame can
slip away and cause injury, so make sure the ground has sufficient load-bearing
capacity.
