Operating Instructions for Tractor A-Frames
Type: GRANIT Index group 778
9
ATTENTION: Insufficient load capacity can cause the equipment to tilt, creating a
risk of accidents!
2.
Secure the vehicle against unauthorised use and movement.
3.
Hook the operating cable into the eye of the unlocking lever.
4.
Remove the spring cotter pin.
5.
Pull the actuating cable to unlock the locking pawl.
ATTENTION: Do not place the actuating cable around your hand or finger as a loop,
there is a danger of crushing and amputation.
6.
After complete uncoupling, dismantle and safely store the actuating cable and put the
spring cotter pin back into the receptacle.
7.
Check that the implement is in a safe position.
6.
Maintenance and repair
Maintenance and repair work may be performed only by qualified personnel.
The specifications for maintenance and care in the operating instructions are binding and
must be observed.
Use only original spare and wear parts.
Welding work on the tractor A-frame or its pick-up points is strictly prohibited.
If a paint touch-up is necessary, make sure not to obscure the instruction and product
signs. If necessary, replace them with original spare parts from Fricke SE.
6.1.
Maintenance plan
The operator must carry out an expert inspection before each initial start-up, after any
changes to the tractor A-frame and at least once a year. These inspections must be suitably
documented.
Before each use, the tractor A-frame must be checked by the operator for damage and wear.
The connecting parts must especially be checked to ensure that they are firmly fixed.
ATTENTION: Failure to follow maintenance instructions can lead to serious accidents
and malfunctioning.
All lubrication points must be lubricated with an environmentally friendly multi-grade grease
according to the following lubrication schedule.
Lubrication schedule
Before the shutdown
(winter break)
After the shutdown
After 20 operating hours
at the latest
Grease the bolts, spring
and joints
Spray oil WD 40
6.2.
Cleaning schedule
Clean the equipment after each use. Careful handling protects the equipment from damage
and extends its service life.
If you are unable to remove dirt and accumulated residues with a brush or broom, we
recommend cleaning with a water jet. Do not use aggressive cleaning agents.
