10
6.2 Wireless Network Installation
Step 1:
Double click on (
)
IPCam Setup’s execution file on the desktop, and the following screen will
appear.
Step 2:
Connect the Wi-Fi Video Server Pro to the PC with the crossover cable. Click the “Auto Detect”
button specified as below, and your video server’s MAC and default IP Address will be listed.
Step 3:
Click on the “MAC”, and the “IP”, “Net Mask”, “Gateway”, “Port Number 1” and “Camera Name”
will be displayed in the “Network Setting” area.
11
NOTE:
The IP Address, Net Mask and Gateway must be corresponding with your network settings for
you to access the video server. You can follow the steps below to get your network information.
-
Open the Microsoft DOS
Command Prompt
shell window.
Windows XP/ Vista
: <Start>
→
<Programs>
→
<Accessories>
→
<Command Prompt>
Windows 7
: <Start>
→
<All Programs>
→
<Accessories>
→
<Command Prompt>
-
Type “ipconfig” and then press “Enter” to get your network information.
-
Assign IP Address, Netmask (Subnet Mask) and Gateway (Default Gateway) for the Wi-Fi
Video Server Pro. (You must use the same Net Mask (ex. 255.255.255.0) and Gateway
(192.168.2.254). You can use any IP address between 192.168.2.1-254, but make sure that the
IP Address has never been used or is used by another IP addressable device.)
Step 4:
Select “WLAN” in the “Mode” selection. Directly modify the “IP”, “Net Mask” and “Gateway”, and
click “Setup” to save.
Step 5:
Click on the “Access Point Search” button and all available access points will be listed.
