26
7.11 Date and Time Settings
User could click on the “NTP” in the Menu List for configuring the time of video server.
Synchronized with Time Server:
Use a NTP server to configure the time of video server.
-
NTP Server:
Enter the NTP server the user wants to use.
-
Time Zone:
Enter the Time Zone in which Wi-Fi Video Server Pro is located.
Manual Update:
Configure the time of Wi-Fi Video Server Pro manually.
-
Date:
Specify the date here.
-
Time:
Specify the time here.
Synchronized with PC:
When this function been selected, Wi-Fi Video Server Pro will
synchronize its time with the PC that is browsing it.
Save button:
Save and apply the configuration.
27
7.12 Motion Detection Settings
Wi-Fi Video Server Pro supports the motion detection function. When this function is enabled, Wi-Fi
Video Server Pro will monitor the video captured by it. And Wi-Fi Video Server Pro will send alarm e-mail
with image/video or upload the image/video to a FTP server when some object moves in the video.
Detect Frame Interval:
Define the detection frame interval here.
Window:
Define the detection area which needs to be monitored in the video. User could draw this
area by using the x and y coordinates.
-
Motion Detection On/Off:
Enable/Disable this detection area. The lower this value, the easier
the motion detection is triggered.
-
Sensitivity:
Defines a value of the changes. It compares the last image and the current image
and counts changes. A small value means more sensitivity.
-
Threshold
: Set the threshold of the motion detection function.
-
Start/Stop Coordinate:
Using the X, Y coordinate to draw the scope of the detection area.
Alarm Picture:
Configuring the alarm picture here. The pictures will be sent with the alarm e-mail
or upload to the FTP server when motion is detected.
-
Enable:
Enable/Disable the alarm picture function.
-
Filename:
Set the name of the pictures sent along with the e-mail or uploaded to the FTP server.
Alarm Video:
Configuring the alarm video here. The video clips will be sent with the alarm e-mail
or upload to the FTP server when motion is detected.
-
Enable:
Enable/Disable the alarm video function.
-
Pre-Alarm I Frame Number:
Set the I frame number the user wants to capture before the motion
happened.
-
Post-Alarm I Frame Number:
Set the I frame number the user wants to capture after the motion
happened.
-
Filename:
Set the name of the video clips sent along with the e-mail or uploaded to the FTP
server.
