4
6. Hardware & Software Installation
6.1 Hardware Installation
Step1.
Drill four holes into the wall, and then hammer the supplied plastic anchors into the holes and
secure the wall mount bracket with supplied screws.
Step2.
Use two screws to fix the bracket to the side of the network camera.
Step3.
Use the screw to fix the network camera to the wall mount bracket.
NOTE:
If the screw cannot be tightened, please re-tighten the screws on the other side.
5
Step4.
Use the supplied hexagon
wrench to adjust the angle of the wall mount bracket.
Step5.
Tighten the two screws to fix the sun shield.
Step6.
Connect the network camera to an Ethernet hub or switch by using a standard cable.
