16
8.3 Video Settings
User can adjust the parameters of the video stream by clicking on “Video” in the Menu List. The details of
video setting should appear in the Main Display area.
8.3.1 IE User
Fixed BitRate:
User might decide the video quality by the bitrates of the video stream. The range
of the bitrates is from 16Kbps to 5Mbps.
Fixed Quality:
User might decide the video quality by selecting the degree of the video quality.
Quality Checkbox and QMax/Qmin:
If the Quality Checkbox is checked, user might specify a
dynamic quality range via QMax/Qmin. The quality range supported by the network camera is from
0 to 51.
Resolution:
Select the video resolution. The network camera supports 4 kinds of resolution: 160 x
120, 320 x 240, 640 x 480 and 1280 x 1024.
Framerate:
Select the frame rate of the video. The range of frame rate supported by the network
camera is from 1 to 30 fps.
IPInterval:
Select the interval between two I-Frames in the video stream. The higher this value,
the easier the video is vague.
CMOS Freq:
Select the frequency of the CMOS sensor. Please accord to the frequency of the
power system (50Hz or 60 Hz) to determine this value.
Vflip:
Vertically rotate the video.
Mirror:
Horizontally rotate the video.
Save button:
Save the configuration. All configurations should be available after the
configurations are successfully saved.
17
8.3.2 iPhone User
The network camera supports iPhone’s browser, Safari. If user uses an iPhone to access to the network
camera, the Video Setting page should appear as below.
Quality:
Select the video quality. The degrees of the video quality supported by the network
camera are from 1 to 100.
Resolution:
Select the video resolution. The network camera supports 4 kinds of resolution: 160 x
120, 320 x 240, 640 x 480 and 1280 x 1024.
Framerate:
Select the frame rate of the video.
CMOS Freq:
Select the frequency of the CMOS sensor. Please accord to the frequency of the
power system (50Hz or 60 Hz) to determine this value.
Vflip:
Vertically rotate the video.
Mirror:
Horizontally rotate the video.
Save button:
Save the configuration. All configurations should be available after the
configurations are successfully saved.
