28
8.13 Port Settings
User could change the port number that used by the video stream. The video stream utilizes the
RTP/RTSP protocol for delivering through the network. Click on “Port” in the Menu List for further settings.
RTSP Port:
Specify the port number the user wants to use for RTSP. The default port is 554.
Control Port:
Specify the control port the user wants to use for sending controlling message to
network camera. The default port number is 21.
RTP Range Low/High:
User might specify the range of the random port that used by RTP protocol.
The default range is from 50000 to 60000.
HTTP Port:
User might change the default port used by HTTP protocol here. The default port
number is 80.
RTSP Over:
Select
the transferring protocol from
AUTO
,
UDP
or
TCP
.
Save button:
Save and apply the configuration.
29
8.14 UPnP Services
The network camera supports UPnP function. Using this function, user could find network camera by just
one click on “My Network Place” (Windows XP and later version). For further setting the UpnP function,
please click on the “UPnP” on the Menu List.
ON:
Enable the UPnP function.
Discovery Enable:
If this function is checked, a Windows user could find network camera in the
My Network Place. About how to enable the UPnP function in the Windows, please refer to
“Section 10 Using UPnP to Connect to the Camera”
UPNP HOSTNAME:
Specify the host name for the UPnP function here.
NAT Traversal Enable:
Enable/ Disable NAT Traversal function. If network camera is located
behind a router (uses a NAT network technology), and the router supports NAT Traversal function,
user might enable network camera to negotiate with the router about the port configuration via this
function.
Off:
Disable the UPnP function.
