46
12.3 Replace the Silica Gel
NOTE:
If the lens cover has been opened, please follow the steps below to replace with new silica gel
before reattaching the lens cover.
Step1.
Refer to section 12.2 for pulling the metal plate out.
Step2.
Take the old silica gel out. Tear down the aluminum foil vacuum bag and take out the silica gel.
Use the double-sided adhesive tape to attach the silica gel to the inside of the camera.
Step3.
Gently push the metal plate back into the place and fasten it with the HEX standoffs.
47
Step4
. Replace the IR LED board and fasten it with the three screws.
Step5
. Tighten the lens cover.
