22
USE AND CARE INSTRUCTIONS
Disconnecting A Liquid Propane Gas (LPG)
Tank From Your Grill
Make sure the Burner Valves and LP Gas tank
valve are off. (Turn clockwise to close.)
Detach the hose and regulator assembly from
the LP Gas tank valve by turning the Quick
Coupling Nut counterclockwise.
WARNING
!
!
If you have a gas leak that cannot be repaired
by tightening, turn off the gas at the source,
disconnect fuel line from your grill and call
1-800-761-5456 or your gas supplier for repair
assistance.
Check all connections for LP Gas Leaks
Never
test for leaks with a flame. Prior to first use,
at the beginning of each season, or every time
your LP Gas tank is changed, you must check for
gas leaks. Follow these three steps:
Make a soap solution by mixing one part liquid
detergent and one part water.
Turn the grill Control Knobs to the full OFF
position, then turn the gas ON at source.
Apply the soap solution to all gas connections
indicated by the arrows. See diagram. If
bubbles appear in the soap solution the
connections are not properly sealed. Check
each fitting and tighten or repair as necessary.
Grill
Range
Check that the end of each Burner Tube is
properly located over each Valve Orifice
1.
Open lid
2. Remove Grease Tray and Drawer (Note: Be sure
to push the tenon (release) down on one side
and up on the other (either side) of the drawer
to unlock to remove the Drawer.
Air
shutter
Air shutter
1. Open Lid
2. Remove Griddle and the refrigerator assembly
.
Grill Model
Range Model
Push tenon down
on one side and up
on the other side to
unlock
Angle to view
orifice and
adjust air shutter
L
R
Angle to view
orifice and
adjust air shutter
Gas Valve/Manifold
Assembly
Regulator
Gas Valve/Manifold
Assembly
Regulator
