14
Note:
All measurements are in inches
Option 2
4-1
Install Regulator with Hose to Hose holder.
(Island Assembly Set - For Option 1 and 2).
With the help of an assistant, proceed with the following steps.
Remove the 2 screws and Upper Right Cart Panel.
Detach the Regulator with Hose from the Hose Holder
and insert the Regulator Hose end through the opening.
Replace the Upper Right Cart Panel and tighten securely
using the screws provided. Be sure that the Regulator Hose
sits within the designated slot opening.
Position the Range and Island set at close range.
Insert the Regulator with Hose through the Hose Inlet on
the Island set and attach the Regulator with Hose to the
Hose Holder.
From the ouside face of the panel seal the Hose Inlet with
the cap provided.
1
2
3
Cart Panel,
Upper/Right
Range
Island
Hose Holder
Hose
Inlet
Panel,
Left
4-2
Install Regulator with Hose to Hose holder.
(Island Assembly Set - For Option 2 Only).
Remove the screws and Hose Holder from the Left Panel.
Align the holes on the Hose Holder and designated holes
on the Right Panel and insert the screws.
Then proceed with the assembly instructions as for
Step 4-1.
Island
Panel,
Right
Hose Holder
Hose
Inlet
Cap
Cap
Slot opening
