24/37
GrainPro® Solar Bubble Dryer™50 Instruction Manual
MA4040RAD0914-9
6.5.
SAFEKEEPING
6.5.1.
Emptied SBD50 should be stored away from
heat or direct sunlight and out of reach of
rodents preferably on a shelf, on an elevated
pallet or suspended from a beam or girder.
NOTE:
Do not place heavy object on top of the
stored bag as it may damage or deform it.
6.4.
RECYCLING
GrainPro Solar Bubble Dryer is made ofPVC and LDPE materials.
6.4.1.
The products can be delivered to the nearest recycling facilities in the area.
6.4.2.
Plastic #3 – PVC (Vinyl) can be recycled into paneling, flooring, speed bumps, decks or roadway
gutters.
6.4.3.
Plastic #4 – LDPE (Low Density Polyethylene) can be recycled into compost bins, paneling, trash can
liners and cans, floor tiles, and shipping envelopes.
6.6.
PLATFORM INSTALLATION OF RODENT GUARD (RG)
6.6.1.
For protection against rodent attacks (one set
contains 4 pieces):
a.
One set can be installed on any platform
legs with leg perimeter (round or square)
of 22 cm (9'') to 44 cm (17'').
b.
If the dimension of the platform leg is
smaller, the rodent guard can be cut in half
to fit. Cut along the lines at the back of the
rodent guard.
6.6.2.
Fold the rodent guard's teeth upwards against
the sides of the leg to keep it from slipping.
6.6.3.
Make sure to overlap the sides at least one
inch.
6.6.4.
Close the overlap together by using a staple,
cable wire, or any fastener.
