22/37
GrainPro® Solar Bubble Dryer™50 Instruction Manual
MA4040RAD0914-9
6.2.
CLEANING THE TOP COVER AND BOTTOM SECTION
6.2.1.
If necessary with soap and water.
6.2.2.
Dry under the sun.
6.3.
BODY FOLDING INSTRUCTION
6.3.1.
Lay down the SBD50 body on a flat surface and
be sure that all the components of the body
are assembled (top cover shall be attached to
drying floor).
6.3.2.
Fold the SBD body into half (3x) by holding and
pulling the exhaust port to the heating area.
6.3.3.
Fold each side with a measurement of 65cm,
and make sure that 100cm width in the middle
is maintained.
