Grainfather Glycol chiller, Инструкция по эксплуатации

Страница: 11 / 16

09.
3. The glycol inlet connection is where the glycol is returned to the chiller to cool back down; these are
gold in colour with red caps. Connect the red hose to the glycol return inlet connection labelled with
number 1. This hose then connects to the coupler on the fermenter that is attached in the highest
position.
NOTE: Make sure that your glycol outlet connection (blue hose) is connected to the coupler in the lowest
position, and the glycol inlet connection (red hose) is connected to the coupler in the highest position. The
glycol needs to be pumped into the cooling sleeve from the bottom to maximise cooling efficiency.
OPERATING AND USING THE CHILLER
1. Plug the power cord into the back of the Glycol Chiller and the other end into a wall socket.
2. Connect the M12 power cord from your Grainfather Conical Fermenter to the connection under
number 1.
3. Turn the power to the chiller on by pressing the power button on the front panel, the button will light
up red.
4. The fermenter will now get its power from the Glycol Chiller and also turn on.
NOTE: Using the chiller with your Conical Fermenter eliminates the need for a separate fermenter power
supply; the chiller provides power to all fermenters through their respective M12 power cords.