Graham-Patten SoundPals, Руководство пользователя

Страница: 64 / 117

56 • DMIX-41 SoundPals User's Guide
To disable inputs as the master:
1. Using the appropriate “ Master Disable ” switches on the
DMIX remote control, disable the desired combination of
inputs from being assigned as the master timing reference.
Note the following important points regarding the master assignment:
•
One of the four inputs must always be assigned as the master.
If all error-free inputs are disabled via remote control, the
output signal will be muted.
•
Any input that is not displaying an error condition (as shown
by a red
ERROR
LED) may be used as the master.
•
If an input is enabled as master, its associated green MASTER
LED lights continuously.
•
If an input is in use as the timing reference, its associated
MASTER
LED blinks slowly .
•
If an input is disabled from being the master, its associated
MASTER LED is off.
IMPORTANT The DMIX uses a priority system for assigning the
master. Of all the inputs “enabled” as master, the
lowest-numbered, error-free input is used as the
master timing reference. If the current master
develops an error, the next lowest-numbered error-
free input automatically becomes the master.