Graham-Patten SoundPals, Руководство пользователя

Страница: 39 / 117

SoundPals User's Guide DFADE-2 • 31
•
REMOTE
— this LED lights when the unit is placed
in remote mode (and Mode Switch 4 is down).
•
I/P VALID
— this LED lights when the AES input
signal indicates that the audio samples are valid.
•
STEREO
— this LED lights when the unit is placed
in stereo mode (and Mode Switch 1 is down).
6) Power Connector — accepts the power jack from the 6 VDC
power supply. Refer to Appendix B for more information
regarding external power.
7) Power LED — the large green LED below the power jack lights
when power is applied.
The figure below illustrates the DFADE-2’s rear panel:
AES IN
MADE IN THE USA
1 2 3 4
AES OUT
1) AES Balanced Input — the AES IN XLR connector accepts a
balanced AES input signal.
2) AES Unbalanced Input — the
AES IN
BNC connector accepts
an unbalanced AES input signal.
NOTE
Do not connect both AES inputs at the same time.
3) AES Balanced Output — provides AES balanced output via
XLR connector. Output is concurrent with the unbalanced
output (BNC) — both can be used simultaneously.
4) AES Unbalanced Output — provides AES unbalanced output
via BNC. Output is concurrent with the balanced output (XLR)
— both can be used simultaneously.