8-24
Chapter 8: Canyon 456
3� Engage the pump using the key switch in the tank manager panel� Turn the switch to the
“start” position momentarily and release� The key will return to the “auto off” position�
The discharge pump will run until the tank manager panel indicates the tank is empty�
4� Turn “Discharge” off on the CZone panel and the Seacock will close automatically�
Service Mode
The 456 VacuFlush head system is equipped with a service mode� This allows for the cleaning of
the bowl or performing other services without running water� To enter service mode, push the
service button for three (3) seconds� The service button will blink while in service mode� To return to
normal toilet operation, push the service button for three (3) seconds�
N OT I C E
Overboard discharge seacock must be secured in the “closed” position in accordance with the
laws in your boating area.
Water Heater
The shore power must be connected or the generator must be on in order to use the water
heater� To activate, turn on the “Water Heater” switch on the CZone panel� This will provide hot
water to the pressurized freshwater system� The water heater can be accessed through the wall on
the forward side of the berth behind a soft panel�
The water heater is preset from the factory to deliver water at 120° Fahrenheit� It is recommended
that the thermostat not be adjusted to avoid the possibility of scalding�
C A U T I O N
To avoid heating element failure, do not turn on the water heater unless it is filled with water.
Windshield Washer Solenoid
There are two switches at the helm that control the wiper system� The “Wiper On” switch
provides power to the system� The wiper will operate until the “Wiper On” switch is turned off� The
“Wiper Control” switch controls the speed and washer function of the wiper system� To use the
washer function, the freshwater pump must be turned on�
1� Push up "Wiper On" switch at the helm switch panel�
2� Turn on wiper control�
•
1 push and release:
Intermittent
•
2 push and release:
Slow
•
3 push and release:
Fast
•
4 pushes:
Returns to intermittent
•
Push and hold
is washer function
Содержание Canyon 456
