Grady-White Boats Canyon 456, Руководство пользователя

Страница: 62 / 90

8-2
Chapter 8: Canyon 456
Each of these interfaces provide over-current protection for the DC electrical components
controlled by the CZone screens� Also, in the situation where the electric device would need to be
manually overridden, these interfaces can provide a means to do that� On all of the DC interfaces
(OI, MOI, COI) there are two positions that the fuse can be placed in� The lower position for normal
operation through CZone and the upper position is for manually overriding Czone and sending
power directly to the device� After the DC component is used or the override is no longer needed,
return the fuse to the lower position, as this is a requirement for CZone to operate correctly�
The CZone AC system uses two components to control the AC electrical accessories� The AC
Mains Interface (ACMI) is located in the Lean Bar� This is the unit that controls all of the AC systems
in the cockpit� Access to this unit is through the door on the forward side of the Lean Bar� The ACMI
also handles the switching of the AC power supply from the shorepower inlet and generator� The AC
Output Interface (ACOI) that has breakers for accessories in the cabin is located behind the door
inside the hanging locker�
On the ACMI and ACOI there are small, black override switches at the top of each interface�
When flipped down, they will provide a manual override of CZone for each AC component� Just like
the DC components the manual override has to be switched off for the system to operate normally�
Consult your dealer for specific information or questions on the accessories included on your boat
and how to operate them�
The CZone system on the Canyon 456 is equipped with specific Auto-On accessories� These
accessories will turn on automatically whenever CZone is powered up� This is normally done by
pressing the #1 button on the CZone keyfob, which turns on the house battery select switch� The AC
accessories that Auto-On, when AC power is available, are the three battery chargers, and the
outlets located in the console and the lean bar� These systems will also stay on when powering
down the CZone system using the keyfob, as long as AC power is available� This allows the use of
these items without the CZone switching system being on� There are also two DC accessories, the
shore power cord reel, and the shower sump box� These items are only operational when the battery
select switch is on�
Transferring AC Power
When using any AC electrical device, power is being supplied from either the generator or shore
power� To transfer between these two power sources follow these steps:
1� Turn off all AC components through the AC control tab on either of the CZone panels�
2� Go to the AC Mains tab on the display�
3� Select either the Generator or Shore Power breaker icons to connect to that AC supply
source�
4� If AC supply is coming from either of these sources the corresponding icon will have a
blue ring when active�
5� Turn on the AC component that you want to operate�