Gradian Universal Anaesthesia Machine, Руководство по обслуживанию

Страница: 6 / 50

SPECIFICATIONS
PHYSICAL AND ELECTRICAL
g Workstation: 146cm x 53cm x 69cm, 130kg; aluminum frame, vertical mounting side rails on both sides, nylon internal tubing
g Top shelf: 54 cm (W) x 37 cm (D), maximum load 35 kg with even load distribution; Epoxy powder coated pressed aluminum;
monitor brackets bolt items to the top of the top shelf
g Drawer: 10cm x 29cm x 32cm in A, 11cm x 29cm x 24cm in B; 35kg weight limit, stainless steel, removable for cleaning.
g Work surface: Stainless Steel, 46 cm (W) x 31 cm (D) x 88 cm (H) above ground (removable) in A, 46 cm (W) x 26 cm
(D) x 88 cm (H) in B
g Mains power supply: 220V, 50-60Hz
g Power: 500 Watts/220v = 2.27 amps
g Oxygen analyzer power: CE-marked, fused and medical grade. Mains powered with battery backup for ten hours of use.
g Automatic over/under voltage mains power isolator protects oxygen concentrator, and sockets for monitor and accessories
g 3.5” TFT touch screen for oxygen percentage display and alarm setting
g Membrane switch for oxygen analyzer power
g Casters: 150 mm diameter single wheel antistatic casters, front lockable casters
OXYGEN SUPPLY AND MONITORING
g Oxygen concentrator flow rate: 0.1 to 10.0 liters per minute
g Maximum oxygen concentration: 95%
NOTE:
The oxygen concentration may vary according to ambient humidity and maintenance of the air filter
g Alternative sources: cylinder yoke, pipeline, or other external flow regulated portable oxygen source
g Automatic room air intake when patient minute volume exceeds supply gas flow
g Accuracy of glass rotameter for O
2
: +/- 2.5% when using 100% O
2
g Integrated inspiratory oxygen analysis uses a MOX-3 oxygen sensor
g Calibration for room air (21%) and 100% oxygen
g Pressure sensitive apnea or high flow alarm
g Adjustable minimum and maximum oxygen alarm settings
g Up to ten hour analyzer battery backup, trickle recharge from mains power
g Membrane keypad and touch screen
OPTIONAL USE OF NITROUS OXIDE
g Sources: pipeline or cylinder
g Hypoxic cut-off: A solenoid automatically shuts off nitrous oxide delivery if supply gas O
2
level falls below a minimum of 25%
g Flow of N
2
O stops if electrical power fails
g Sight and touch differentiated flow control dial per ISO standards
g Accuracy of glass rotameter for N
2
O: +/- 2.5%
VENTILATION
g Manual bellows for adult and pediatric use made from durable, long-lasting silicone rubber
g 1600cc capacity
g Inspiratory pressure relief of 55 cmH
2
O for pressure created during mechanical ventilation
g Aluminum bellows block
g Silicone balloon inflating valve at the expiratory port
g 15mm female/22mm male ISO standard taper connection for breathing circuit, 30mm male ISO standard taper connection for AGSS
scavenging equipment
VAPORIZERS
g Stainless steel and plated brass construction
g Draw over flow type
g Pour filler type.
g Separate units for isoflurane, sevoflurane, and halothane per ISO standards
g Agent delivery range: 0.5% to 4%
g 120ml capacity
4