Graco TexSpray Compact HP, Инструкция-перечень запасных частей

Страница: 3 / 28

3 308718
WARNING
TOXIC FLUID HAZARD
Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin,
inhaled, or swallowed.
Know the specific hazards of the fluid you are using.
Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local,
state and national guidelines.
Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and
solvent manufacturer.
Pipe and dispose of exhaust air safely, away from people, animals, and food handling areas.
Never directly inhale compressed air. Compressed air may contain toxic vapors.
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
The system is for use only with water-based materials. Use fluids compatible with the
equipment wetted parts. Refer to the Technical Data section of all equipment manuals. Read the
fluid and solvent manufacturer’s warnings.
Ground the equipment. See Grounding and Electrical Requirements on page 6.
If there is any static sparking or you feel an electric shock while using this equipment, stop
spraying immediately. Do not use the equipment until you identify and correct the problem.
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed.
Keep the work area free of debris, including solvent, rags, and gasoline.
Locate the sprayer at least 20 ft (6.1 m) away from any explosive vapors, due to arcing parts.
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
CLEANING SOLVENT HAZARD WITH PLASTIC PARTS
Use only compatible solvents to clean plastic structural or pressure-containing parts. Many solvents
can degrade plastic parts to the point where they could fail. Such failure could cause serious injury or
property damage. See the Technical Data section on page 27 in this instruction manual and in all
other equipment manuals. Read the fluid and solvent manufacturer’s warnings.