Graco System 3800, Руководство пользователя

Страница: 4 / 22

4 309246
General Information
System HVLP Turbine Sprayers
The System 2500 , 3800 , and 4900 Sprayer,
System ProCart , and HVLP–Turbine Gun can spray
most coatings or finishes currently being used for
automotive refinish, industrial, aerospace, marine,
wood, plastic, and architectural applications.
To produce high-quality paint finishes, the spray gun
typically utilizes inbound air pressure of 5 psi (0.3 bar,
34 kPa) for System 2500
; 6 psi (0.4 bar, 41 kPa) for
System 3800 ; and 8 psi (0.5 bar, 55 kPa) for
System 4900 . A cone of air, produced by the gun,
carries and directs the paint from the gun to the
surface, minimizing overspray and increasing transfer
efficiency. This enables painters to comply with new
clean air laws that are designed to reduce VOC
(volatile organic compounds) emissions, eases paint
application by requiring fewer paint passes to obtain
coverage, and saves on both material and clean-up
time.
See the HVLP–Turbine Gun manual 309205 for more
information on the operation and use of the turbine
spray gun.
Unpacking Turbine Sprayer
Unpack the turbine sprayer from the shipping carton,
and inspect for any possible shipping damage. If there
is any damage, call your distributor.
Turbine Sprayer Configurations
The turbine sprayers come in the following basic
configurations:
System 2500 two-stage HVLP turbine sprayer
System 3800 three-stage HVLP turbine sprayer
System 4900 four-stage HVLP turbine sprayer
System HVLP Turbine Sprayer Components Table
System Model 30-ft (9 m) Hose
Gun /
Fluid Set Extra/Fluid Sets
2500 826000 241413 244117 non–
bleeder style cup gun
/
244124 (#3)
fluid set
none
3800 826001 241413 244117 non–
bleeder style cup gun
/
244124 (#3)
fluid set
244125 (#4)
244126 (#5)
4900 826004 241413 244117 non–
bleeder style cup gun
/
244124 (#3)
fluid set
244123 (#2)
244125 (#4)
244126 (#5)
244127 (#6)