4
309377
Installation
Typical Installations
Fig. 1 shows a typical hose reel installation. These
dispense valves can also be installed on a console, as
shown in Fig. 2.
Do not use this dispense valve on non-Graco
consoles. Such use could result in the trigger
becoming inadvertently pressed while the dis-
pense valve is stowed.
CAUTION
Fig. 1
L
M
K
N
J
H
06174B
KEY DESCRIPTION
H
Thermal relief kit (required) Part No. 235998
Install downstream from pump.
J
Fluid shut-off valve
K
Hose
L
Hose reel fluid inlet hose
M
Hose reel
N
PM5 electronic metered dispense valve
The typical installation shown in Fig. 1 is only a guide.
The components shown are typical; however, it is not a
complete system design. Contact your Graco distribu-
tor for assistance in designing a system to suit your
particular needs.
This dispense valve is not designed for in-line
installation. Do not install with a shut-off valve
on the outlet side of the meter. Such installation
could result in damage to the meter housing
cover.
CAUTION
Mounting Bracket
Mounting bracket 196471 is available for resting a PM5
dispense valve on a console. See Fig. 2.
Do not obstruct the trigger of this dispense
valve, and do not set the unit down resting on its
trigger, or it might not stop dispensing.
CAUTION
mounting bracket
196471
Fig. 2
TI0334
