Operation
3A9034B
11
7. Engage Parking/Emergency Brake when not
operating LineDriver. This prevents rolling when on
an incline.
Operating on Inclines
Extended Braking Distance
Operating on inclines results in extended braking
distances.
1. Select Incline/ECO mode on Speed Switch when
operating on inclines.
2. Be prepared to use the Parking/Emergency Brake
when operating on inclines.
NOTE:
Do not operate on inclines greater than 7.5°
(13%).
Starting and Stopping on an Incline
1. Engage the Parking/Emergency Brake before
turning the Power Switch to OFF when parking on
an incline.
2. Turn the Power Switch to ON, and allow the
machine to initialize before releasing the
Parking/Emergency Brake when starting on an
incline.
Trailer Loading & Unloading
NOTE
: LineDriver ES rolls freely, especially on inclines,
when the power is off. Set Parking/Emergency Brake
before turning off. Turn power on before releasing
Parking/Emergency Brake.
1. Always keep LineDriver connected to striper or
grinder.
2. Use a level surface to load and unload. Leave
sufficient space behind ramps.
3. Use loading ramps of sufficient length and capable
of handling weight of unit and operator.
4. Adjust striper or grinder handlebar to highest
position. Slide seat back as far as possible.
5. Use right foot to engage Parking/Emergency Brake.
Use left foot to control speed. Use ECO Mode to
limit speed.
6. Slowly drive straight up/down ramps (do not drive
at an angle).
7. Keep a firm grip on handlebars as the ramp is
negotiated.
NOTE:
Striper or grinder handlebars swing up/down as
the ramp is engaged/disengaged. Keep legs clear.
REDUCED BRAKING HAZARD
The braking from the Direction/Speed pedals can be
significantly reduced when going down inclines at
speeds over 6.5 mph (10 kph). This reduced braking
results in longer braking distance than normal, which
could lead to an accident.
A continuous buzzer alarm will sound when this
reduced braking condition occurs. If this alarm
sounds, apply the Parking/Emergency Brake to slow
down. Failure to do so could result in serious injury.
• Do not drive in a manner that causes this alarm to
sound.
Содержание LineDriver 25U670
