Installation
1. Remove feed hose and air supply line out of the
accessory box that came with InvisiPac.
Figure 1
2. Connect clear feed hose to InvisiPac funnel and
to the top of the feed wand. Secure feed hose on
each end with the hose clamp supplied. Connect
blackairline to the push to connect fitting (
on top of the InvisiPac. Connect the other end of
blackairline to the outside of the feed container
fitting (G). See
.
Figure 2
3. Remove packing material from new container
and feed wand inside the container.
4. Slide feed wand through the opening in the white
insert on the top cover.
Figure 3
5. Connect the white, blackand gray air hose to the
end of the feed wand. Connect corresponding
colors to fitting labeled with that color.
Figure 4
Note
If using the tankoption continue with step
6, if not using the tankjump to step 8.
334629A
5
