Graco GrindLazer 25M992, Руководство по ремонту

Страница: 12 / 20

Pulley Replacement
12 3A5919A
Pulley Replacement
Removal
1. Remove drum (see Drum Replacement , page 6).
2. Remove belt guard and belt (see Belt
Replacement , page 9).
3. Remove three belt pulley screws and washers.
4. Insert three screws into pulley removal holes.
Evenly tighten screws and slowly remove pulley.
5. Remove pulley.
Installation
6. Install pulley onto hex shaft.
7. Insert three pulley screws and washers.
8. Replace belt guard and belt (see Belt
Replacement , page 9).
9. Replace drum (see Drum Replacement , page 6).
To avoid injury from unexpected start up, disconnect
spark plug wire and black battery cable (DC1021 G
only) before you service your unit.
ti15122a
ti15121a
ti15126a
ti15131a
ti15127a