![background image](http://html1.mh-extra.com/html/graco/grindlazer-25m992/grindlazer-25m992_repair-manual_2251629009.webp)
Belt Replacement
3A5919A
9
Belt Replacement
Removal
1. Remove three nuts and washers. Remove belt
shroud.
2. Loosen jam nut through two sides of belt.
3. Use two wrenches to loosen motor mount bolts on
each side of scarifier base.
4. Tighten bottom bolt to lower pulley plate.
5. Remove used belt.
To avoid injury from unexpected start up, disconnect
spark plug wire and black battery cable (DC1021 G
only) before you service your unit.
ti15064a
ti15085a
ti15066a
ti15069a