Electrical
Electrical
Electrical Connections
Connections
Connections
Install per Graco Control Drawing 16M169, in Manual
332013. See also Figure 1.
1.
Connect main power supply cord (E, not
supplied) through strain relief to terminals L and
N on the power supply unit.
Note:
Note:
Note: Use either strain relief (5) or (6), depending
on the size of the cord.
2.
Connect power cord ground wire to ground
terminal block.
3.
Connect IS power cable (F) per the following
table.
Power
Power
Power Cable
Cable
Cable Leads
Leads
Leads
Barrier
Barrier
Barrier Connection
Connection
Connection
Brown (power)
Connector 1
Blue (common)
Connector 2
Glossy Black (ground) and Black (drain) connect to
ground block.
Figure 1
KEY
KEY
KEY
E
Inbound AC Power Cord
F
Power Cable to Informer
W
Ground Wires
X
Barrier
Y
Ground Block
5
Strain Relief Fitting
6
Strain Relief Fitting
3A2040H
13
