Graco 25T991, Инструкция - Каталог запасных частей

Страница: 22 / 52

Repair
22 3A8476A
2. Align the four access holes in the center 3D body
(301) with the M6 flathead socket screws (503) in
the swivel housing assembly (511). Torque
fasteners to 80 in-lb (9.0 N•m).
3. With a soft face mallet, gently tap the center 3D
body (301) into the swivel housing assembly (511)
to ensure the center 3D body is positioned against
the flange bearing (502).
4. Slide the lock ring assembly (201) onto the shank of
the center 3D body (301) and into place against the
flange bearing (502). Ensure that the pin in the one
half of the lock ring (201) is engaged in the hole of
the washer (202).
5. Apply medium strength threadlocker to the two M5
SHCS screws (203) and torque to 57.5 in-lb (6.5
N•m). See F
IG
. 27.
Material Tube Assembly
1. Install adapter gasket (102) into the end of the
center body (301).
2. Apply anti seize to lubricant to threads of center
body (301) and long 3D tube assembly (503).
3. Rest the turnbuckle locking nut (101) on the
threaded end of the center body (301) but do not
thread on.
4. Align and insert the pins on the end of the 3D long
tube assembly (103) into the central body (301).
Turn the turnbuckle nut clockwise as seen facing
the swivel housing so that the threads of the long 3D
tube assembly (103) and center body engage
simultaneously. Torque the nut to 75 ft-lb (101.69
N•m). See F
IG
. 28.
F
IG
. 26
F
IG
. 27
511
619
501
301
503
503
203
301
201
202
511
F
IG
. 28
301
102
101
103