Repair
24
3A8476A
11. Apply a thin coat of lithium grease to the air gaskets
(410) and insert into the 3D center body (301).
12. Insert the air cylinder assembly into the center body
(301). apply medium strength threadlocker onto the
M5 screws (408) and torque to 57.5 in-lb (6.5 N•m).
NOTE
: The dimple (A) in the face of the 3D center body
(301) lines up with the long bearing seal guide (414).
See F
Connection Housing Assembly
1. Apply a thin coat of lithium grease to O-ring (613)
and locate it on the swivel housing (511). Locate the
SST single inlet adapter (602) on the dowel pins
and place onto the swivel housing (511). Apply
thread locker to the four M5 SHCS screws (601)
and torque to 57.5 in-lb (6.5 N•m).
2. Apply a thin coat of lithium grease to the seal on the
1/8 in. BSPP elbow fitting (512). See F
3. Attach inner cover (513) to the swivel housing
assembly (511) with two M3 flathead screws (515)
and torque to 8 in-lb (0.9 N•m).
4. Apply a thin coat of lithium grease to air gasket
(514). Locate air valve manifold (516) dowel pins
onto the swivel housing assembly (511). Insert two
M3 SHCS fastener screws (517) and torque to 8
in-lb (0.9 N•m).
5. Attach air valves (518) with their included captured
screws onto the air valve manifold (516). Install
solenoid valve cable connections (617) to air valves.
See F
F
IG
. 32
F
IG
. 33
409
403
402
401
A
410
402
408
F
IG
. 34
613
601
602
512
511
