Appendix
Appendix
Appendix B:
B:
B: Cables
Cables
Cables
The following cables are typically used to connect the components in an Intelligent Paint Kitchen system.
Cable
Cable
Cable Type
Type
Type
Length
Length
Length
Part
Part
Part No.
No.
No.
Use
Use
Use
Ethernet Cable
1 foot (0.3 m) 121994
25 feet (8 m) 121998
50 feet (16
m)
121999
100 feet (30
m)
15V842
200 feet (60
m)
15V843
1.
Use to connect the Touchscreen Box (J) to the
Supervisor Box (A).
2.
Use to connect multiple Supervisor Boxes together.
50 feet (16
m)
121700
500 feet (152
m)
115769
RS-485 Communica-
tion (Twisted Two-Wire
Shielded Cable)
1000 feet
(305 m)
115770
1.
Use for Variable Frequency Drive/Inverter (B)
communication.
2.
Use to connect each Expansion Box to a Supervisor
Box.
3.
Use to connect each Variable Frequency
Drive/Inverter to a Supervisor Box.
3 feet (1 m)
16P911
IS CAN Cable
(Female-Female)
25 feet (8 m) 16P912
Use to connect a Pump Control Module (PD) to a pump.
10 feet (3 m) 17T898
50 feet (16
m)
16M172
100 feet (30
m)
16M173
Fiber Optic Cable
330 feet (100
m)
17B160
1.
Use to connect each Pump Control Module to a fiber
optic converter inside the Supervisor Box.
2.
Use to connect a Tank Control Module (TD) to a
Pump Control Module.
I/O Cable
25 feet (8 m) 16Y911
Use to connect a Back Pressure Regulator Controller
(F) or Radar Level Sensor (M, T) to the pump or Tank
Control Module. NOTE: This cable comes installed from
the factory on the Back Pressure Regulator Controller and
Radar Level Sensor.
52 feet (16
m)
16K509
IS Power Cable
105 feet (32
m)
16K615
Use to connect each Tank Control Module to the
DC Power Supply with Barrier (S) installed in the
non-hazardous location.
150
3A4030C