Ref.
Ref.
Ref.
Item
Item
Item
Description
Description
Description
5
Status
Indicates whether the pump is stopped, stalled, or running.
• Stopped
• Stalled
• Running
• Stopped — Deviation
• Stalled — Deviation
• Running — Deviation
• Stopped — Alarm
• Stopped — Advisory
• Stalled — Advisory
• Running — Advisory
6
Run/Stop Switch
Indicates whether the run/stop switch for the pump is on or off.
7
Fill Pump Enable
Indicates whether the remote transfer fill pump in this station is on
(pumping), or off (not pumping).
8
Reed Switch Count
Auxiliary function. Indicates the cycle count.
9
Active Profile
Displays the profile (if one is selected) that is currently specifying pump
performance.
10
CPM
Real time display of the pump operating speed in cycles per minute.
11
Pressure
Real time display of the pump output pressure. Displayed in the units of
measure chosen when the pump was set up.
Press
to view or change the pump output pressure.
12
Flow
Real time display of the pump flow rate. Displayed in the units of
measure chosen when the pump was set up.
13
% BPR
Real time display of the Back Pressure Regulator setting.
• 0% = Open
• 100% = Closed
14
Profiles
Each column (#1–#4) displays the settings of a pump profile. When one
of these profiles is selected, the chosen column is highlighted in green.
15
Profile Select
Press one of the following to choose the profile and set operation
parameters for the pump:
Turn off the pump.
Turn off the pump.
Select Profile 1, if created.
Select Profile 2, if created.
Select Profile 3, if created.
Select Profile 4, if created.
108
3A4030C