Installation
6
333233D
5.
Attach ground wire to ground terminal inside junc-
tion box (S).
NOTE:
The power cord attaches to a separate
ground screw than the ground screw that is already
attached.
6.
Place fan wires and other power wires into open
area on either side of disconnect block (J) as space
permits. Reinstall junction box cover. See F
7.
Replace junction box screws and washers removed
in step 2 and tighten cord grip to securely hold
power cord in junction box (S). See F
Grounding
Driver:
The driver is grounded through the power cord.
NOTICE
If wires get pinched when the screws are tightened,
damage will occur. Make sure all wires are routed
correctly before installation.
F
IG
. 4: Grounding Wire
WLE
WLD
G
J
E
F
IG
. 5: Junction Box Screws and Strain Relief
The equipment must be grounded to reduce the risk
of static sparking and electric shock. Electric or static
sparking can cause fumes to ignite or explode.
Improper grounding can cause electric shock.
Grounding provides an escape wire for the electric
current.
WLD
S
