Graco 24V016, Запасные части

Страница: 10 / 26

Troubleshooting
10 333233D
4 Deviation High Temperature
The temperature of the system is near the maximum operation temperature. The
performance has been reduced to prevent the sprayer from completely shutting
down.
• Check fan operation. Clean fan and driver housing. Verify fuses are intact in junc-
tion box.
• Reduce pressure, duty cycle, or gun tip size.
• Move unit to a cooler location.
5 Alarm Motor Temperature Fault
Motor is running too hot. Allow unit to cool.
• Check fan operation. Clean fan and driver housing. Verify fuses are intact in junc-
tion box.
• Reduce pressure, duty cycle, or gun tip size.
• Move unit to a cooler location.
6 Alarm Board Temperature Fault
The control board is running too hot. Allow unit to cool.
• Check fan operation. Clean fan and driver housing. Verify fuses are intact in junc-
tion box.
• Reduce pressure, duty cycle, or gun tip size.
• Move unit to a cooler location.
7 Alarm Encoder Calibration Error
• Cycle power and check status indicator to see if error is still active.
• Calibrate the encoder (see page 17).
• Contact your Graco distributor or Tech Service for more information.
8 Alarm Encoder Error
• Cycle power and check the status indicator to see if the error is still active.
• Verify that the encoder cable is connected securely.
• The encoder may need to be replaced.
• Contact your Graco distributor or Tech Service for more information.
9 Alarm Software Versions Do Not Match
• Obtain software update token and follow Software Update procedure
(contact your Graco distributor or Tech Service for more information).
10 Alarm Circuit Board Communication Failure
• Cycle power and check status indicator to see if error is still active.
• Contact your Graco distributor or Tech Service for more information.
11 Alarm Internal Circuit Board Hardware Failure
• Cycle power and check status indicator to see if error is still active.
• Contact your Graco distributor or Tech Service for more information.
12, 13 Alarm Internal Software Error
• Cycle power and check status indicator to see if error is still active.
• Contact your Graco distributor or Tech Service for more information.
Fast Flash Deviation
See Power Saving Mode , page 9.
Blink Code Error Type Troubleshooting Steps