![background image](http://html1.mh-extra.com/html/graco/24t918/24t918_instruction-manual_2252663077.webp)
Repair
333347F
77
Software Update Procedure
When software is updated on the ADM the software is
then automatically updated on all connected GCA com-
ponents. A status screen is shown while software is
updating to indicate progress.
1.
Turn system main power switch OFF.
2.
Remove ADM from bracket.
3.
Remove token access panel.
4.
Insert and press InvisiPac software upgrade token
(T, part no. 24R324) firmly into slot.
NOTE:
There is no preferred orientation of token.
5.
Install ADM into bracket.
6.
Turn system main power switch ON.
NOTE:
When the screen turns on, you will see the fol-
lowing screens:
7.
Remove token (T).
8.
Replace token access panel.
9.
Press
to continue to the InvisiPac operation
screens.
F
IG
. 62: Remove Access Panel
F
IG
. 63: Insert Token
NOTICE
A status is shown while software is updating to
indicate progress. To prevent corrupting the software
load, do not remove token until the status screen
disappears.
r_24P860_3B9900_3a
T
r_24P860_3B9900_4a
Icon
Description
Update successful.
Update unsuccessful.
Update complete, no changes
necessary.
Update was successful/com-
plete but one or more GCA
modules did not have a CAN
boot-loader so software was
not updated on that module.
First:
Software is checking
which GCA modules
will take the available
updates.
Second:
Status of the update
with approximate time
until completion.
Third:
Updates are complete.
Icon indicates update
success/failure. See
the following Icon
table.
Содержание 24T918
Страница 16: ...Component Identification 16 333347F ...
Страница 103: ...Accessories 333347F 103 ...
Страница 129: ...Technical Data 333347F 129 ...