Graco 24R968, Инсталляционные компоненты

Страница: 9 / 40

Installation
Installation Installation Installation
Before Before
Before Installing
Installing
Installing the
the
the Kit
Kit
Kit
• Servicing the electrical control box exposes you
to high voltage. To avoid electric shock, turn off
power at the main circuit breaker before opening
the enclosure.
• All electrical wiring must be done by a qualified
electrician and comply with all local codes and
regulations.
• Do not substitute or modify system components
as this may impair intrinsic safety.
Follow the Pressure Relief Procedure in
your PD2K manual whenever you see
this symbol.
This equipment stays pressurized until pressure
is manually relieved. To help prevent serious
injury from pressurized fluid such as skin injection,
splashing fluid, and moving parts, follow the
Pressure
Pressure Pressure Relief Relief Relief Procedure Procedure Procedure in your system manual
when you stop spraying and before cleaning,
checking, or servicing the equipment.
1. Flush the system as explained in your PD2K
Operation Manual. Follow the Pressure Relief
Procedure in your PD2K manual.
2. Close the main air shutoff valve on the air supply
line.
3. Remove electrical power from the system.
NOTE: NOTE: NOTE: The pump expansion kit can be mounted
directly on the PD2K stand, or mounted onto a wall.
Install using the steps in
Install the Frame, page 10 or
the steps in Install the Wall Bracket, page 11 .
332456D 9