Graco 24M510, Инструкции по сборке, установке и эксплуатации

Страница: 11 / 34

Installation
3A2592A 11
Ceiling Mounting Without an I-Beam - Open Channel
For SD10 Models order kit: 24A934, 24A935, 24A936, 24A937, 24A938, 24A939
For SD5 Models order kit: 24N674, 24N675
For SD5 Models mounted in an SD10 Model Mounting Channel: SD5 models require a specific hold down plate
designed for SD5 Cord Reels. Contact Graco Customer Service for assistance when ordering these parts.
NOTE: See page 16 for Open Channel dimensions.
1. Ceiling Mount Only: Position cord reel so the reel
base is facing up. Check pawl to make sure it is not
wedged (F
IG
. 4, 9). (Also see General Installation
Information page 8.)
2. Use the base channel (F
IG
. 8 - 103) to lay out the
position of the mounting holes before you drill.
3. Drill mounting holes.
4. Install the base channel (103) and base plate (105)
as shown in F
IG
. 8.
5. Slide cord reel into the reel base (105) and install
the hold down plate (104), washer (102) and screw
(101). Tighten the screw firmly (F
IG
. 8). Be sure it is
secure before lowering the lift truck.
6. Continue installation following steps 6 - 8 of
Wall/Ceiling Mounting with Plate instructions,
page 9.
Ceiling Mounting Directly to an I-Beam
1. Check pawl to make sure it is not wedged (F
IG
. 4,
9). (Also see General Installation Information page
8.)
2. Use the mounting template (F
IG
. 9 - B) to lay out the
position of the mounting holes before you drill
NOTE: Templates to scale are provided starting on
page 28.
3. Drill mounting holes in the I-Beam (C) (F
IG
. 9).
4. Bolt reel to I-Beam. Be sure it is secure before
lowering the lift truck.
5. Continue installation following steps 6 - 8 of
Wall/Ceiling Mounting with Plate instructions, page
9.
Open Channel Mounting Kits
SD 5 Models SD 10 Models
FN Description
24N674
1 Reels 24N675
2Reels
24A934
1 Reel
24A935
2 Reels 24A936
3 Reels 24A937
4 Reels 24A938
5 Reels 24A939
6 Reels
101
SCREW, 3/8” - 16 x
5/8”
5 10 5 10 15 20 25 30
102 WASHER, lock, 3/8” 5 10 5 10 15 20 25 30
103 BASE, reel, channel 1 1 1 1 1 1 1 1
104 PLATE, hold down 1 2 1 2 3 4 5 6
105 BASE, plate 1 2 1 2 3 4 5 6
F
IG
. 8
103
102
101
104
105
F
IG
. 9
A
B
C