Graco 24M510, Инструкции по сборке, установке и эксплуатации

Страница: 10 / 34

Installation
10 3A2592A
6. If needed, adjust spring tension. See the Increasing
Spring Tension or Decreasing Spring Tension sec-
tion of this manual, page 14.
7. Position cord stop at a height that is easily accessi-
ble to the user. Tighten nuts to securely hold stop in
place.
8. Plug power cord into grounded electrical outlet.
Retrofit Bracket
1. Drill holes in mounting surface. Use reel base (103)
as a template for mounting hole position or refer to
F
IG
. 6 for dimensions.
Dimensions
A 129.5 mm (5.1 in)
B 76.2 mm (3.0 in)
C 101.6 mm (4.0 in)
D
Ø
12.7 mm (0.50 in)
2. Mount reel base (103) to wall or ceiling using 4, user
supplied mounting bolts that are strong enough to
support the weight of the cord reel, cord and acces-
sories. Tighten bolts securely.
3. Mount base plate (105) to reel base (103) using four
screws (101).
4. Continue installation instructions, steps 5 - 8, page
9.
Retrofit Bracket SD10 SD5
FN Description 24N689 24N688
101 SCREW, 3/8” x 16 x 5/8” 5 5
102 WASHER, lock,3/8” 5 5
103 BASE, reel 1 1
104 PLATE, hold down 1 1
105 BASE, plate 1 1
F
IG
. 6
A
C
B
D
F
IG
. 7
101
105
104
102
103
101