Installation
10
3A1318B
Grounding
1.
Pump:
. 3. Use the ground wire and clamp
(41, supplied). Loosen the grounding screw (GS).
Insert one end of the ground wire behind the
grounding screw and tighten the screw securely.
Connect the clamp end of the ground wire to a true
earth ground.
2.
Air and fluid hoses:
Use only grounded hoses
with
a maximum of 500 ft (150 m) combined hose length
to ensure grounding continuity.
3.
Air compressor:
Follow manufacturer’s
recommendations.
4.
Spray gun:
ground through connection to a prop-
erly grounded fluid hose and pump.
5.
Agitator:
use the ground wire and clamp (108, sup-
plied). Loosen the grounding lug locknut (W) and
washer (X). Insert one end of the ground wire (108)
into the slot in lug (Z) and tighten the locknut
securely. Connect the ground clamp to a true earth
ground.
6.
Suction hose:
Attach the hose (8) ground wire to
the ground lug on the agitator. If you are not using
an agitator, attach the wire to the fluid supply con-
tainer.
7.
Fluid supply container:
Follow local code.
8.
Object being sprayed:
Follow local code.
9.
Solvent pails used when flushing:
Follow local
code. Use only conductive metal pails, placed on a
grounded surface. Do not place the pail on a non-
conductive surface, such as paper or cardboard,
which interrupts grounding continuity.
10.
To maintain grounding continuity when flushing or
relieving pressure
, hold a metal part of the spray
gun firmly to the side of a grounded
metal
pail, then
trigger the gun.
The equipment must be grounded. Grounding
reduces the risk of static and electric shock by
providing an escape wire for the electrical current
due to static build up or in the event of a short circuit.
F
IG
. 3. Ground the Pump.
ti12214a
41
GS
F
IG
. 4. Ground Agitator and Suction Hose
ti0720a
8
108
W
X
Z
Содержание 24H313
Страница 17: ...Maintenance 3A1318B 17...
Страница 26: ...Mounting Hole Layout 26 3A1318B...