LL250 Compressor Installation
332230N
19
LL250 Compressor Installation
Tools Needed:
2.5 mm Allen wrench, 4.0 mm Allen wrench,
1/4 in. Allen wrench, 7/16 in. wrench, 9/16 in. wrench, 11/16 in.
wrench, T-20 Torx bit, rubber mallet, Phillips screwdriver.
1. Turn unit OFF and remove key. Let unit cool prior to
working on it.
2. Disconnect battery cable.
3. Perform
Pressure Relief Procedure
page 5.
4. Using bolts (38), plus lock nuts (20), install air
bracket (2).
5. Using a 9/16 in. wrench and screws (19), mount the
air tank to the new air tank bracket (2).
6. Using T-20 star bit, remove fan grill (FF) from
shroud (BB). Save screws for reattachment.
Replacing the compressor requires pulling on the
starting rope. To help prevent entanglement, pinching,
and potentially serious injury from an unexpected
start-up, turn engine off, remove key and disconnect
the battery cable prior to compressor replacement.
Содержание 16R955
Страница 33: ...Notes 332230N 33 Notes ...
Страница 34: ...Parts Model 25R268 34 332230N Parts Model 25R268 ...
Страница 36: ...Parts Model 25R270 36 332230N Parts Model 25R270 ...