200HC/DC/MMA Pressurized Bead System Kit 25R268
332230N
7
200HC/DC/MMA Pressurized Bead System Kit 25R268
Assemble Compressor Mounting
and Drive Components
NOTE:
Glass bead system and paint guns can be
mounted on either side of sprayer.
1. Turn off unit. Perform
2. Loosely install two screws (MM) and two locknuts
(NN) through bottom of frame mount but do not
tighten. Remove existing gun arm bracket to gain
access to nut (NN).
3. Assemble hopper basket (XX) and base with hard-
ware as shown below. Use 9/16 in. wrench to snug
screws. Loosen all six screws 1/4 turn.
ti21201a
NN
MM
ti21194a
XX
Содержание 16R955
Страница 33: ...Notes 332230N 33 Notes ...
Страница 34: ...Parts Model 25R268 34 332230N Parts Model 25R268 ...
Страница 36: ...Parts Model 25R270 36 332230N Parts Model 25R270 ...