Variable Frequency Drive (VFD) Kits and Options
311596A
5
Variable Frequency Drive (VFD) Kits and Options
Kits and options can be ordered through your Graco Distributor.
Repair Kits
Transducer Kit P/N 15H876 - replaces the pressure
sensor and its circuit board. Note that pressure sensor
can be calibrated, and calibration procedure is included
in this manual.
Circuit Board Kit P/N 15H879 - replaces the sensor cir-
cuit board.
Top Dead Center Sensor Kit P/N 15H877 - replaces
top dead center (TDC) sensor.
Options
Ethernet Upgrade Kit P/N 15H885 - provides Ethernet
module for the VFD. Ethernet cable is not included.
Circuit System Kit P/N 15J755 - contains PCB and
sensors necessary to run Graco programmed VFD and
take advantage of low flow and pressure fluctuations
delivery by Graco software.
Local I/O Box P/N 120373 - allows the operator to con-
trol the E-Flo Plus locally at the pump when performing
maintenance or troubleshooting. The local I/O box has
the following features:
•
secure disable switch
•
run/stop switch
•
local/remote switch
•
jog/park switch
•
trip reset
Power Module P/N 288036- supplies necessary hard-
ware to interface with the pump’s intrinsically safe (IS)
circuitry. The hardware includes IS barriers, transformer,
24 VDC power supply, fuses and terminal blocks for con-
nectivity.
RFI Filter Module for 230 VAC VFD: P/N 120365
RFI Filter Module for 480 VAC VFD: P/N: 120366
VFD 200/240V Control Kit: P/N 15J753
VFD 380/480V Control Kit: P/N 15J754
