Grace Q'nique 14+, Руководство пользователя

Страница: 13 / 42

13
1. Place thread on the cone style thread stand.
2. Pull the thread through both loops of the thread
mast.
3. Put the thread through the top hole on the thread
guide, wrap the thread around and through the
bottom hole of thread guide at the middle of the
machine.
4. Take the thread through the first thread tensioner,
between the two disks.
5. Loop the thread down around the second tensioner.
6. Pull the thread through the tensioner disks and
around the spring hook.
7. Feed the thread through the right thread guide up
to the take up lever.
8. Pull the thread through the hole in the take up
lever.
9. Feed thread into the left thread guide below.
10. Pull the thread down towards the needle
and through the bottom thread guide.
11. Feed the thread through the eyelet in
the front of the needle arm.
12. Feed the thread through the eye of
the needle.
Threading The Quilting Machine
1
2
3
4
5
6
7
8
9
10
11
12
11
12
Needle Diagram
Make sure the
thread is between
the tensioner discs
Scarf
Eye
Point
Shaft
Shank
Front View Side View
Groove
Use cone style
thread thread
*Be sure to
install the
Needle with
the scarf
toward
the throat
of your
machine.
The Thread Must
Go Through The
Check Spring
A threading tutorial is availablie on our website at:
http://www.qniquequilter.com/videos/tutorials/
QR CODE